Fluor powder
€40.90
Available, delivery time: 1-3 days
Product information "Fluor powder"
This fluor powder gives your skis extra speed during competitions on wet, old snow.
As a base, we recommend HF1 or HF2. The powder is sprinkled on the race-prepared skis. The powder is then slightly melted (by gliding over the ski base at approximately 130°C), either frozen or corked.
Afterwards, brush and polish.
- Application Area: Competition
- Air Temperature: +3° C to -10° C
- Snow Type: Wet, old snow
All our fluor waxes do not contain any prohibited fluorocarbon compounds.
| Luftfeuchtigkeit: | 50% - 75%, über 75% |
|---|---|
| Lufttemperatur: | -6° bis -4°, -8° bis -6°, -10° bis -8° |
| Schneeeigenschaft: | Altschnee (fein), nass, Altschnee (grob), nass |
HABRUS
Johann Brunner
Talstraße 36
D-94209 Regen
Email : info @ habrus.de
Login
Als finish für folgende Wachse
The HF2 with a high fluor content is ideal for competitions in wet or moist, already transformed snow and increased humidity. It is also well-suited as a base for highly dosed fluor powders. This German high-fluor brand wax is ideal for competitions, whether for cross-country skiing, alpine skiing, or snowboarding. All our fluor waxes contain no prohibited fluorocarbon compounds. After cleaning the base (brushing), apply the wax hot and iron it onto the base. After cooling, scrape it off with a plexiglass scraper and brush out the base structure again.Application area: CompetitionAir temperature: -4° C to -10° CHumidity: 50% - 75%Type of snow: wet / moist transformed snowIroning temperature: 125°C - 135°C
Content: 0.18 Kilogramm (€199.44 / 1 Kilogramm)
The HF1 with a high fluor content is ideal for competitions in wet or moist snow and high humidity. It is also well-suited as a base for highly dosed fluor powders.This German high-fluor brand wax is ideal for competitions, whether for cross-country skiing, alpine skiing, or snowboarding. All our fluor waxes contain no banned fluorocarbon compounds.After cleaning the base (brushing), apply the wax hot and iron it onto the base. After cooling, scrape it off with a plexiglass scraper and brush out the base structure again.Application area: CompetitionAir temperature: 2° C to -4° CHumidity: over 75%Type of snow: wet / moist snowIroning temperature: 110°C - 120°C
Content: 0.18 Kilogramm (€221.67 / 1 Kilogramm)
Was du zum Wachsen brauchst
This is how you wax your skis or board like a pro. Unlike many cheap irons, this professional waxing iron features a milled 15mm aluminum plate for better wax distribution and a microprocessor-controlled temperature monitoring. It also impresses with its practical digital temperature display. This way, you always have the exact right temperature and won’t burn the base. All details at a glance:Waxing iron with 230 V power 850 watts 50 Hzdigital displaystepless temperature selection via touch buttonsMicroprocessor-controlled temperature monitoring, temperature is monitored 10 times per second, max temperature fluctuation +/- 2° Chigh-quality 15 mm thick aluminum die-cast plateTemperature setting from 90°C to 180°C, infinitely adjustable. The last set value is automatically saved and offered again when switched on next
This rotary brush with soft fleece is perfect for applying fluorine powders or pastes to the ski or snowboard base. With the help of the rotary brush, wax is applied evenly and worked into the microstructure of the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more. Product Features:Hexagonal receptacle 10 mmBrush size 115 mm wideDiameter 80 mmPractical tip from our ski workshop: Especially for processing speed pastes, the fleece brush is particularly suitable: we apply the paste evenly to the base with a lint-free cloth (e.g., microfiber) and then work the pastes into the base with the fleece brush. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!
You need this professional cork brush to cork high-quality fluorine powder into the base of your skis or board.The cork rotary brush is the perfect complement to your wax brush set. You can also find other rotary brushes and the corresponding handle here in the shop.Product Features:Diameter 65mmHexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again. If you are using fluorine powder for corking, we recommend using this cork brush for it.Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!
This rotary brush with soft nylon is perfect for brushing and polishing the ski or snowboard base. Ideally, use a harder horsehair brush before the nylon brush to remove excess wax from the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more.Product Features:Hexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush again.For a final finish and to achieve a perfect result, we use the Micro Steel Brush again. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!
With the World Cup rotary brush set, you'll treat your skis or board like a pro. This high-quality rotary brush set consists of a handle with a short axle including work protection, rotary brush Nylon, rotary brush Horsehair, rotary brush Brass, Roto cork, and a large wax case. Product features:Handle part made of anodized aluminumStainless steel axle, double ball-bearing with sealed bearings for dust and moisture protectionCompatible with brushes from other manufacturersHexagon socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the bronze rotary brush before the first waxing. After scraping off the excess wax, we brush the base structure with the hard horsehair brush and then polish the base with the soft nylon brush again. We mainly use the cork brush for corking fluorine powders.Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!