Long axis for two rotor brushes (snowboard version)

This handle, including hand protection, fits all brushes in our program and most rotary brushes from other manufacturers due to its 10mm hexagonal receptacle. Full metal version made of stainless steel, handle piece made of anodized aluminum, double ball-bearing, proven click-lock system from the World Cup, meaning the axis does not need to be removed from the drill chuck to change the brush.With an axis for Habrus brushes with a length of 115 mm, we also have axes for brushes from other manufacturers in the program, e.g., 100 mm and 140 mm.Practical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again. If you are using fluorine powder for corking, we recommend using the cork brush for this (sold separately). Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

You need this professional cork brush to cork high-quality fluorine powder into the base of your skis or board.The cork rotary brush is the perfect complement to your wax brush set. You can also find other rotary brushes and the corresponding handle here in the shop.Product Features:Diameter 65mmHexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again. If you are using fluorine powder for corking, we recommend using this cork brush for it.Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

  This steel brush meets even the highest demands in professional sports. Thanks to micro-fine wires, the ski base is perfectly freed from excess wax, revealing the structure of the base. The application is very simple: just brush over the base once or twice with little pressure, and you'll get a perfect result. The steel roto brush is the ideal complement to your wax brush set. You can also find other roto brushes and the corresponding handle here in the shop.   Product Features: Wire thickness 0.08mm Hexagonal socket 10 mm Brush size 115 mm wide   Practical tip from our ski workshop: For base cleaning, we use the brass roto brush before the first waxing (available separately). After scraping off excess wax, we brush the base structure of the board or skis with the hard horsehair brush (available separately) and then polish the base with the soft nylon brush (available separately) once again. For a final finish and to achieve a perfect result, we then use this Micro Steel Brush.   Work with roto brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!    

This rotary brush with soft nylon is perfect for brushing and polishing the ski or snowboard base. Ideally, use a harder horsehair brush before the nylon brush to remove excess wax from the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more.Product Features:Hexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (sold separately). After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush again.For a final finish and to achieve a perfect result, we use the Micro Steel Brush again. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with hard horsehair bristles is ideal for brushing the base of your skis or snowboard. Ideally, use a softer nylon brush afterward to polish the base once again and remove any remaining wax. If you prefer to work with just one brush, this horsehair brush is your best choice.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets in stock where you can save extra.Product Features:Hexagonal socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (available separately). After scraping off excess wax, we brush the base structure of the board or skis with the hard horsehair brush and then polish the base with the soft nylon brush (available separately) once again.For a final finish and to achieve a perfect result, we then use this Micro Steel Brush again.Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with brass bristles is perfect for cleaning the ski or snowboard base. This prepares the base for waxing and allows it to better absorb the new ski or snowboard wax.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more.Product Features:Hexagonal receptacle 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing. After scraping off excess wax, we brush the base structure of the board or skis with the stiff horsehair brush (sold separately) and then polish the base with the soft nylon brush (sold separately) again.For a final finish and to achieve a perfect result, we use the Micro Steel Brush again (sold separately). Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!

This rotary brush with soft fleece is perfect for applying fluorine powders or pastes to the ski or snowboard base. With the help of the rotary brush, wax is applied evenly and worked into the microstructure of the base.You can also find other rotary brushes and the corresponding handle here in the shop. Additionally, we have affordable brush sets available where you can save even more. Product Features:Hexagonal receptacle 10 mmBrush size 115 mm wideDiameter 80 mmPractical tip from our ski workshop: Especially for processing speed pastes, the fleece brush is particularly suitable: we apply the paste evenly to the base with a lint-free cloth (e.g., microfiber) and then work the pastes into the base with the fleece brush. Work with rotary brushes at low pressure and speeds up to approximately 1,000 revolutions per minute!