Low fluor wax LF2
€13.90
Available, delivery time: 3-5 Tage
Product information "Low fluor wax LF2"
The LF2 with low fluorine content is ideal for training on humid, transformed snow and high humidity.
It is also well-suited as a base for fluorine-containing race waxes.
This German low fluor brand wax is ideal for training or competitions and is suitable for all ski and snowboard bases.
After cleaning the base (brushing), apply the wax hot and iron it into the base.
After cooling, scrape it off with a scraper and brush out the base structure again.
- Application area: Training / Competition
- Air temperature: -2° C to -10° C
- Humidity: increased humidity from 50%
- Type of snow: transformed, wet, fine-grained snow
- Ironing temperature: 120°C - 125°C
| Luftfeuchtigkeit: | 50% - 75% |
|---|---|
| Lufttemperatur: | -4° bis -2°, -6° bis -4°, -8° bis -6°, -10° bis -8° |
| Schneeeigenschaft: | Altschnee (fein), nass |
HABRUS
Johann Brunner
Talstraße 36
D-94209 Regen
Email : info @ habrus.de
Login
Was du zum Wachsen brauchst
Original Habrus groove cleaner with four different radii for different groove widths.Perfect for cleaning ski edges as well.
With this, you can wax your skis or board like a pro. Unlike many cheap irons, this professional waxing iron features a milled 15mm aluminum plate for even better wax distribution and microprocessor-controlled temperature monitoring.This keeps the set temperature with only minimal fluctuations of +/- 2°C. Thus, you always have the exactly right temperature and won’t burn the base. All details at a glance:Waxing iron with 230 V power 850 watts 50 HzTemperature setting from 90°C to 160°C in 10 stagesMicroprocessor-controlled temperature monitoring, temperature is monitored 10 times per secondmax. temperature fluctuation +/- 2° Chigh-quality 15 mm thick aluminum die-cast plate
With this rotary brush starter set, you get the two most important wax brushes to professionally wax your skis or snowboard from now on.This high-quality rotary brush set consists of a handle with a short axle including work protection, rotary brush Nylon, and rotary brush Horsehair. Product features:Handle part made of anodized aluminumStainless steel axle, double ball-bearing with sealed bearings for dust and moisture protectionCompatible with brushes from other manufacturersHexagon socket 10 mmBrush size 115 mm widePractical tip from our ski workshop:For base cleaning, we use the brass rotary brush before the first waxing (not included in this set). After scraping off the excess wax, we brush the base structure with the hard horsehair brush and then polish the base with the soft nylon brush again.If you use fluorine powder for corking, we recommend the cork brush for this purpose (not included in this set. Available either individually or in the "World Cup" professional set). Work with rotary brushes with little pressure and speeds up to approximately 1,000 revolutions per minute!
This high-quality wax scraper made of polycarbonate is significantly more stable than many cheap acrylic or plexiglass scrapers. With its 3 different radii, it can easily clean the center groove of cross-country skis or, through the side cutout, the edge of alpine skis. Especially sharp-edged - for easy removal of hot wax.Size: 150mm x 60mm x 5mm
Für ein perfektes finish
This fluor paste gives your skis extra speed during competitions on wet, old snow. As a base, we recommend HF1 or HF2. The paste should be applied thinly to the skis prepared for the competition and allowed to air out. Then brush and polish. Field of application: Competition Air temperature: +5° C to -10° C Type of snow: Wet, old snow
Content: 0.03 Kilogramm (€996.67 / 1 Kilogramm)
The orange fluor speed wax with a high fluor content is the high-end finish for competitions in transformed snow at around -5°C. This German high-fluor brand wax is ideal for competitions, whether for cross-country skiing, alpine skiing, or snowboarding. As a base for this ultra-fast speed wax, we recommend the high fluor wax HF2. The orange finishing wax is then also ironed in, scraped off, and brushed out just like all other hot waxes. For the final brushing, we recommend the ultra-fine micro steel brush. All our fluor waxes contain no banned fluorocarbon compounds.Application area: CompetitionAir temperature: around -5° CType of snow: transformed snowIroning temperature: 120°C
Content: 0.035 Kilogramm (€482.86 / 1 Kilogramm)
The pink fluor speed wax with a high fluor content is the high-end finish for competitions in wet conditions. This German high-fluor brand wax is ideal for competitions, whether for cross-country skiing, alpine skiing, or snowboarding. As a base for this ultra-fast speed wax, we recommend the high fluor wax HF1. The pink finishing wax is then also ironed in, scraped off, and brushed out just like all other hot waxes. For the final brushing, we recommend the ultra-fine micro steel brush. All our fluor waxes contain no banned fluorocarbon compounds.Application area: CompetitionAir temperature: around 0° CHumidity: over 75%Type of snow: wet / moist snowIroning temperature: 110°C
Content: 0.035 Kilogramm (€482.86 / 1 Kilogramm)
The blue fluor speed wax with a high fluor content is the high-end finish for competitions in powder snow at around -10°C. This German high-fluor brand wax is ideal for competitions, whether for cross-country skiing, alpine skiing, or snowboarding. As a base for this ultra-fast speed wax, we recommend the high fluor wax HF2. The blue finishing wax is then also ironed in, scraped off, and brushed out just like all other hot waxes. For the final brushing, we recommend the ultra-fine micro steel brush. All our fluor waxes contain no banned fluorocarbon compounds.Application area: CompetitionAir temperature: around -10° CType of snow: powder snowIroning temperature: 130°C
Content: 0.035 Kilogramm (€482.86 / 1 Kilogramm)